Stanley Multi-Code Garage Door Opener And Gate Operator Receivers

Stanley Multi-Code Garage Door
Opener And Gate Receivers

Stanley Garage Door Opener Remote Controls

Remote And Keypad Questions?
Call Toll Free 888-341-3003

Orders Ship The Next Business Day!

Stanley Multi-Code Garage Door Opener Receivers

Compatible With Stanley Electronics, Whistler Innovations And Stanley Home Automation.
The Stanley Multi-Code Digital Remotes Use 10 Switches To Set The Code.
You Must Have A Remote With Switches To Set The Remotes Code.
Two And Four Button Remotes Have Two Sets Of Switches To Set The Code.
Your Model Numbers Are On The Back Of The Receiver.
Remote And Keypad Questions? Call Us Toll Free 888-341-3003.
Orders Ship The Next Business Day

Multi-Code Stanley One Door or One Gate Receiver - Models 309013, MCS309013, 3090-13
Requires 10 Switch, 2 position settings

The Model 309013 1-Channel Receiver is designed for use in residential garage door operator applications.
Typically the receiver mounts directly to the three terminals on the door operator.
An 11-inch wire antenna extends from the receiver.
The operator supplies 24-volt power to the receiver, or the receiver can be powered by a separate (optional) 24-volt AC power transformer.
The receiver is programmed with a 10-position coding switch.
When a transmitter set to the same code is activated, the receiver's output will activate, triggering the door operator.
The Model 309013 is compatible with 310 MHz Stanley and Multi-Code transmitters only.

Features:
Operates on 24 VAC power
One channelCodes: 1,024 (set by dip switches)
RF frequency: 310 MHz
Dimensions: 3" W x 5.5" H x 1.5"
Programing Instructions Are Included With Your Order
The 3090-13 Receiver Is In Stock And Ships The Next Business Day.

$39.95

Stanley One Door or One Gate Receiver - Models 1099-50, MCS109950, 109950
The MCS109950 Receiver Replaces The Following Items MCS109930, MCS109931, MCS109940
Requires 10 Switch, 2 position settings To Set The Codes

The receiver can operate from 12-30 volts AC or 10.5-30 volts DC and are normally powered from the operator. Their relay contact(s) are rated at 30 VAC/DC up to 5 Amps. The receiver support transmitters that use the Multi-Code format (300 MHz), as well as the Stanley compatible (310 MHz) format. Both formats support 1,024 system codes for the MCS109950 (system codes are easy to set via dip switches).

Features:
Dual frequency - Multi-Code or Stanley compatible; jumper selectable
12-24 Volts AC or DC
Auto voltage sensing - no jumpers to set, Single relay
Supplied with whip antenna, three feet of coaxial cable and bulkhead connector
Power: 12-30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered
Frequency: 300 MHz and 310 MHz
Dimensions: 3.625 x 5.25 x 1.5 inches
Programing Instructions Are Included With Your Order
The MCS1099-50 Receiver Is In Stock And Ships The Next Business Day.

$54.95

Stanley Two Door or Two Gate Receiver - Models 3028-50, MCS302850, 302850
Requires 10 Switch, 2 position settings To Set The Codes

The  receiver can operate from 12-30 volts AC or 10.5-30 volts DC and are normally powered from the operator.
The receiver supports transmitters that use the Multi-Code format (300 MHz), as well as the Stanley compatible (310 MHz) format.
Both formats support 1,024 system codes for the 512 system codes for the MC302850 (system codes are easy to set via dip switches).

Features:
Dual frequency - Multi-Code or Stanley compatible; jumper selectable
12-24 Volts AC or DC
Auto voltage sensing - no jumpers to set, Single relay
Supplied with whip antenna, three feet of coaxial cable and bulkhead connector
Power: 12-30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered
Frequency: 300 MHz and 310 MHz
Dimensions: 3.625 x 5.25 x 1.5 inches
Programing Instructions Are Included With Your Order
The MCS3028-50 Receiver Is In Stock And Ships The Next Business Day.

$64.95

Commercial Gate Operator Receiver Accessories

DC5196  24 Volt Harness Wire Adapter with Push/On Connection

Connects to the operator's three terminal screws and tabs as shown
Allows receiver to be mounted with in 3 feet of the opener
Length: 3 feet.

$6.95

DC5197 110 Volt Adapter With Harness

New style with Push/On Connection
Quick connection 3 Tab receiver spade lugs with lug connections for the operator push button terminals.
Length (adapter to tabs): 6 feet.

$16.95

DC5166-03 Co-Axial Cable Mounting Kit

To be used in conjunction with the light-commercial receivers.
This is a 13 foot length of co-axial cable, with Type F fittings at both ends.
The mounting bracket is 5-1/4" long, with a 2-1/2" outward extension

$26.95

1066-04 Local Replacement Antenna

Soft plastic connector boot.  

$9.95

Multi-Code® and Linear® are registered trademarks of the Linear Corporation. Stanley® is a registered trademark of the Stanley Corporation.

Stanley Gate Safety Edge Transmitter, 310MHz - Model MCS105104
Requires 10 Switch, 2 position settings To Set The Code

Gate Safety Edge Transmitter For Stanley Multi-Code Receivers With 310MHz
Compatible with 310MHz Stanley Multi-Code receivers only
Safety edge transmitter activates receiver for stop or reverse entrapment
No cables or coiled wires
Mounting hardware (4 screws) supplied
Power: 9-volt battery
Codes: 1,024 (set by dipswitches)
RF frequency: 310MHz
Dimensions: 4.28” W x 2.875” H x 2.25” D
Special Order Item, Allow approx. 5-7 Days For Delivery

$104.95