Stanley Garage Door Opener Model ST400

One Button Visor Remote, 310MHz

This remote uses a 10-position on/off coding switches to set the remote's code for 9 or 10 switch remotes. Codes are set by matching the switches to a working remote or to the switches on the back of the opener's receiver.

You can review the directions below.

Includes battery, visor clip and programming instructions.

Ships the next business day.

Directions For 9 or 10-Position “Switch” Receivers and Remotes

Match the position of each transmitter switch to the corresponding powerhead switch location.

Example:

If switch #3 is toward the open/off position on the powerhead, its counterpart in the transmitter should also be in the open/off position.

If #4 is in the closed/on position, the transmitter switch #4 should also be set to the closed/on position, etc.

If your powerhead has only nine switches, then place the transmitter’s tenth switch in the open/off position.