This two-button remote also works the door open/close feature on some digital door openers.
The new two button Stanley Multi-Code visor remote is designed for Stanley garage doors. This is a two-button remote, by pressing the pushbutton it will send a signal to the receiver to activate the garage door opener. The transmitter will only activate opener receivers set with the same code settings and the 310Mhz frequency. This remote uses two set of switches to set the codes for two different Stanley openers. Includes battery, visor clip and programming instructions.
Ships the Next Business Day.
Match the position of each transmitter switch to the corresponding powerhead switch location.
If switch #3 is toward the open/off position on the powerhead, its counterpart in the transmitter should also be in the open/off position.
If #4 is in the closed/on position, the transmitter switch #4 should also be set to the closed/on position, etc.
If your powerhead has only nine switches, then place the transmitter’s tenth switch in the open/off position.
Determine which wires if any have been clipped on your opener. When a coding wire is cut, the corresponding transmitter switch should be moved to the open/off position for proper coding. With no code wires cut on the opener, all even numbered transmitter switches should be pushed to the closed/on position and all odd numbered transmitter switches pushed to the open/off position.